Specifications

spanning-tree vlan priority
202
spanning-tree vlan priority
Sets the PVST+ bridge priority.
Syntax
To set or change information:
spanning-tree vlan <VLAN ID list> priority <Priority>
To delete information:
no spanning-tree vlan <VLAN ID list> priority
Input mode
(config)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the set VLAN.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to set <VLAN ID list> and the specifiable values, see
Specifiable values for parameters.
<Priority>
Sets the bridge priority. The lower the value, the higher the priority.
Use a multiple of 4096 as the bridge priority.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 61440
3. Note on using this parameter:
Changing the bridge priority might change the topology.
Default behavior
The bridge priority is set to 32768.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None