Specifications

spanning-tree vlan port-priority
201
spanning-tree vlan port-priority
Sets the priority for the applicable PVST+ ports.
Syntax
To set or change information:
spanning-tree vlan <VLAN ID list> port-priority <Priority>
To delete information:
no spanning-tree vlan <VLAN ID list> port-priority
Input mode
(config-if)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the set VLAN.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to set <VLAN ID list> and the specifiable values, see
Specifiable values for parameters.
<Priority>
Sets the port priority. Use a multiple of 16 as the port priority. The lower the value, the
higher the priority.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 240
3. Note on using this parameter:
Changing the port priority might change the topology.
Default behavior
The setting of the spanning-tree port-priority command is used. If the
spanning-tree port-priority command has not been set, the port priority is set to 128.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
spanning-tree port-priority