Specifications

spanning-tree vlan
191
spanning-tree vlan
Configures PVST+. If the no spanning-tree vlan command is set after the
spanning-tree single command has been set, the applicable VLAN operates with Single
Spanning Tree.
Syntax
To set or change information:
no spanning-tree vlan <VLAN ID list>
To delete information:
spanning-tree vlan <VLAN ID list>
Input mode
(config)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the set VLAN.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to set <VLAN ID list> and the specifiable values, see
Specifiable values for parameters.
3. Note on using this command:
If the
spanning-tree single command has been set, VLAN1 does not
operate in PVST+ mode.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
vlan