Specifications

spanning-tree single transmission-limit
190
spanning-tree single transmission-limit
Sets the maximum number of BPDUs that can be sent during the hello-time interval for
Single Spanning Tree.
Syntax
To set or change information:
spanning-tree single transmission-limit <Counts>
To delete information:
no spanning-tree single transmission-limit
Input mode
(config)
Parameters
<Counts>
Sets the maximum number of BPDUs that can be sent per
hello-time interval.
This parameter is valid only when
rapid-stp (802.1w) is set by the spanning-tree
single mode command. If stp (802.1D) is set by the spanning-tree single mode
command, the maximum number of BPDUs that can be sent per second is 3 (fixed)
and the setting value of this command is ignored.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1 to 10
Default behavior
The maximum number of BPDUs that can be sent is set to 3.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
spanning-tree single mode
spanning-tree single hello-time