Specifications

spanning-tree single priority
189
spanning-tree single priority
Sets the bridge priority for Single Spanning Tree.
Syntax
To set or change information:
spanning-tree single priority <Priority>
To delete information:
no spanning-tree single priority
Input mode
(config)
Parameters
<Priority>
Sets the bridge priority. The lower the value, the higher the priority. Use a multiple of
4096 as the bridge priority.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 61440
3. Note on using this parameter:
Changing the bridge priority might change the topology.
Default behavior
The bridge priority is set to 32768.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None