Specifications

spanning-tree portfast bpduguard default
178
spanning-tree portfast bpduguard default
Sets the BPDU guard functionality to be used by default. This command is valid for all ports
on which the PortFast functionality of PVST+, Single Spanning Tree, and Multiple Spanning
Tree is set.
Syntax
To set information:
spanning-tree portfast bpduguard default
To delete information:
no spanning-tree portfast bpduguard default
Input mode
(config)
Parameters
None
Default behavior
If the spanning-tree bpduguard command is set, that setting is used. If the
spanning-tree bpduguard command is not set, this command does not operate.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
spanning-tree portfast default
spanning-tree portfast
spanning-tree bpduguard