Specifications

spanning-tree pathcost method
175
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. When mst is set by the spanning-tree mode command, Multiple Spanning Tree
operates using a 32-bit value. To set a value of 65536 or larger for the path cost
using the
spanning-tree cost command, you must set long for this command.
You do not need to set this command before setting a path cost value using the
spanning-tree mst cost command.
Related commands
spanning-tree cost
spanning-tree vlan pathcost method
spanning-tree vlan cost
spanning-tree single pathcost method
spanning-tree single cost