Specifications

spanning-tree mst max-hops
170
spanning-tree mst max-hops
Sets the maximum-number-of-hops count for BPDUs in Multiple Spanning Tree.
Syntax
To set or change information:
spanning-tree mst max-hops <Hop number>
spanning-tree mst
<MSTI ID list> max-hops <Hop number>
To delete information:
no spanning-tree mst max-hops
no spanning-tree mst
<MSTI ID list> max-hops
Input mode
(config)
Parameters
<MSTI ID list>
Sets an MST instance ID. One MST instance ID can be set. You can use a hyphen
(
-) or a comma (,) to set multiple MST instance IDs at one time.
1. Default value when this parameter is omitted:
All MST instances are selected.
2. Range of values:
0 to 4095
<Hop number>
Specifies the maximum-number-of-hops count for BPDUs forwarded by the Switch.
1. Default value when this parameter is omitted:
20
2. Range of values:
2 to 40
Default behavior
The maximum-number-of-hops count for BPDUs is set to 20.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None