Specifications

name
153
name
Sets a string to identify a Multiple Spanning Tree region.
Syntax
To set or change information:
name <Name>
To delete information:
no name
Input mode
(config-mst)
Parameters
<Name>
Sets the character string used to identify a region.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that is no more than 32 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
3. Note on using this parameter:
To configure the same MST region, the values for this parameter and the
revision parameter, as well as those of the MST instance ID and the VLAN
ID set by the
vlans parameter, must match within the MST region.
Default behavior
Null is set for name.
Impact on communication
When mst is set for the spanning-tree mode command, recalculation of the topology
interrupts communication until the topology is formed.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
spanning-tree mst configuration