Specifications

vlan-protocol

147

Impact on communication

None

When the change is applied

The change is applied immediately after setting values are changed. Note, however, that

for protocols that have not been set by the

protocol command for the protocol VLAN, the

change is applied when the protocol name is set by the

protocol command.

Notes

1. If a value smaller than 05ff is set for the ethertype value (four-digit hexadecimal),

0000 is set.

2. For <HEX enum>, one or more

ethertype values (four-digit hexadecimal) can be

set. When you specify multiple values, use a comma (

,) as the delimiter.

ethertype, llc, and snap-ethertype can be entered in any order, but ethertype,

llc, and snap-ethertype are displayed in this order for the show running-config

operation command.

4. A maximum of 16

ethertype values can be specified on a single line.

5. The same protocol value cannot be specified multiple times on one line. (Example:

vlan-protocol xxx ethertype <HEX> llc<HEX> ethertype<HEX>).

6. Protocol names set by the

protocol command cannot be deleted.

Related commands

protocol