Specifications

vlan-protocol
146
vlan-protocol
Sets the protocol name and protocol value for a protocol VLAN.
Syntax
To set or change information:
vlan-protocol <Protocol name> [ethertype <HEX enum>] [llc <HEX enum>]
[snap-ethertype <HEX enum>]
To delete information:
no vlan-protocol <Protocol name>
Input mode
(config)
Parameters
<Protocol name>
Sets the protocol name used for configuring the protocol VLAN.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that is no more than 14 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
ethertype <HEX enum>
Sets the ethertype value for an Ethernet V2-format frame.
1. Default value when this parameter is omitted:
None
2. Range of values:
Four-digit hexadecimal
llc <HEX enum>
Sets the LLC value (DSAP, SSAP) of an 802.3-format frame.
1. Default value when this parameter is omitted:
None
2. Range of values:
Four-digit hexadecimal
snap-ethertype <HEX enum>
Sets the
ethertype value for an 802.3-format frame.
1. Default value when this parameter is omitted:
None
2. Range of values:
Four-digit hexadecimal
Default behavior
None