Specifications

vlan
145
vlan
command:
The following table applies to the
vlan command.
# Parameter Whether specifiable by
the user
Behavior specific to the default VLAN
1 <VLAN ID> F (fixed value) Set when the Switch is started.
Fixed at 1. Cannot be changed or deleted.
2
<VLAN ID list>
F (fixed value) --
3 protocol-based N Port VLAN
4 mac-based N Port VLAN
Legend F: Can be set as a fixed value; N: Cannot be set; --: Not applicable
config-vlan mode command:
The following table applies to the
config-vlan mode command.
# Command Parameter Whether
specifiable
by the
user
Behavior specific to the
default VLAN
1 state {suspend | active} -- Y --
2 name
<string>
Y --
3 protocol
<Protocol name>
N --
4 mac-address
<MAC>
N --
Legend Y: Can be set; N: Cannot be set; --: Not applicable
5. When the
vlan command is used to create a VLAN, information can be set for the
VLAN interface by using the
interface vlan command. For VLANs created by
using the
vlan command, use the no interface vlan command to delete
information. For a VLAN created by using the
interface vlan command, use the no
vlan command to delete information.
6. If the automatic assignment of VLANs is specified by using the
no vlan command,
the VLAN automatically registered on the MAC port is deleted and authentication on
the applicable terminal is canceled.
Related commands
None