Specifications

switchport mac
135
switchport mac vlan
command cannot be set.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID list> and the specifiable values,
see Specifiable values for parameters.
vlan add <VLAN ID list>
Adds the currently-valid MAC VLANs for this port to the VLAN list.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID list> and the specifiable range of
values, see Specifiable values for parameters.
vlan remove <VLAN ID list>
Removes the valid MAC VLANs for this port from the VLAN list.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID list> and the specifiable range of
values, see Specifiable values for parameters.
dot1q vlan add <VLAN ID list>
Adds a VLAN able to forward tagged frames on the port to the VLAN list. Specifiable
VLANs are port VLANs or MAC VLANs. A VLAN set by using the
switchport mac
vlan command cannot be set.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID list> and the specifiable range of
values, see Specifiable values for parameters.
dot1q vlan remove <VLAN ID list>
Removes a VLAN able to forward tagged frames on the port from the VLAN list.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID list> and the specifiable range of
values, see Specifiable values for parameters.
Default behavior
None. If a MAC port has been set by using the switchport mode mac command and the
switchport mac command has not been set, only the default VLAN operates.
Impact on communication
None