Specifications

interface port-channel
113
interface port-channel
Sets an item related to a port channel interface. Entering this command switches to
config-if mode, which allows you to use configuration commands to specify the channel
group number. A port channel interface is automatically generated when the
channel-group mode command is set.
Syntax
To set or change information:
interface port-channel <Channel group#>
To delete information:
no interface port-channel <Channel group#>
Input mode
(config)
Parameters
<Channel group#>
Sets the channel group number.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
See Specifiable values for parameters.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. If you want to delete this command, do so after executing the shutdown command
for all ports in the applicable channel group.
Related commands
interface fastethernet
interface gigabitethernet
interface range