Specifications

channel-group periodic-timer
111
channel-group periodic-timer
Sets the LACPDU sending interval.
Syntax
To set or change information:
channel-group periodic-timer { long | short }
To delete information:
no channel-group periodic-timer
Input mode
(config-if)
Parameters
{ long | short }
Sets the interval at which the remote device sends LACPDUs to a Switch.
long: 30 seconds
short: one second
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
long or short
Default behavior
long (30 seconds) is set as the sending interval.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. This command is effective only when LACP-based link aggregation is used.
Related commands
interface port-channel
channel-group mode