Specifications

shutdown
99
shutdown
Places the port in the shutdown state. If a port with the PoE functionality is shut down,
power is no longer supplied.
Syntax
To set information:
shutdown
To delete information:
no shutdown
Input mode
(config-if)
Parameters
None
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. When Set of ifAdminStatus is executed by the SetRequest operation of SNMP
from the SNMP manager, the setting is applied to this command.
2. During scheduled operation of the power saving functionality, the Switch operates
according to the configuration of the
schedule-power-control shutdown
interface
command.
3. If you want a port to be always shut down regardless of a schedule, you must set
both the
schedule-power-control shutdown interface command and this
command.
Related commands
None