Specifications

power inline system-allocation [AX2200S]

Manually sets the maximum amount of power that can be supplied to system 1.

The maximum amount of power for system 2 is calculated by subtracting the value set by

this command from the maximum amount of power that can be supplied to this Switch.

Syntax

To set or change information:

power inline system-allocation limit <Threshold>

To delete information:

no power inline system-allocation

Input mode

(config)

Parameters

limit

Manually sets the maximum amount of power that can be supplied to system 1.

Manually sets the maximum amount of power that can be supplied to system 1

in steps of 400 mW.

1. Default value when this parameter is omitted:

This parameter cannot be omitted.

2. Range of values:

16000 to 240000 (mW)

Default behavior

The maximum amount of power that can be supplied to system 1 is set to 61600 (mW).

Impact on communication

Yes

When the change is applied

If you have changed any values, save the configuration and restart the Switch. The new

setting values take effect when the Switch is restarted.

Notes

1. When this command is entered, the message below appears. In response, save the

settings, and then restart the Switch.

Please execute the reload command after save,

because this command becomes effective after reboot.

Related commands

power inline