Specifications

power inline priority-control disable [AX2200S] [AX1240S]
97
power inline priority-control disable [AX2200S] [AX1240S]
Assigns priority to a powered port.
Syntax
To set information:
power inline priority-control disable
To delete information:
no power inline priority-control disable
Input mode
(config)
Parameters
None
Default behavior
The priority setting for ports is enabled.
Impact on communication
Power to all ports is temporarily stopped.
When the change is applied
If you have changed any values, save the configuration and restart the Switch. The new
setting values take effect when the Switch is restarted.
Notes
1. When this command is entered, the message below appears. In response, save the
settings, and then restart the Switch.
Please execute the reload command after save,
because this command becomes effective after reboot.
2. When a Switch is restarted, power is supplied to the ports in order from port 0/1.
Because of this, the power might be supplied through a different powered port after a
restart.
3. When this command is set, the priority setting established by the
power inline
command becomes invalid, and the port is recognized as a port to which the power is
supplied. If the
power inline never command is set, power is not supplied.
4. This command assigns priority to the powered ports of system 1 and system 2
respectively. [AX2200S]
Related commands
power inline