Specifications

power inline allocation [AX2200S] [AX1240S]
95
power inline allocation [AX2200S] [AX1240S]
Sets power allocation for each port either based on its class or manually.
Syntax
To set or change information:
power inline allocation {auto | limit <Threshold>}
To delete information:
no power inline allocation
Input mode
(config-if)
Parameters
auto
Detects a power-receiving device and automatically categorizes power classes, and
sets the amount of power allocated to the applicable port based on its class.
The following table lists the power classes and the maximum output power for each.
Power class Maximum output power
Class0 15.4W
Class1 4.0W
Class2 7.0W
Class3 15.4W
Class4 30.0W
limit
Detects a power-receiving device and automatically categorizes power classes, and
sets the amount of power allocated to the applicable port manually.
<Threshold> [AX2200S]
Sets the amount of power for a port and the amount of power consumption to
be used for priority control in steps of 200 mW or 400 mW. This parameter
becomes valid when
limit is specified.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
See the table below.
Port Setting range (in mW) Increment (in mW)
0/1 to 0/4 4000 to 30000 200
30000 to 60000 400