Specifications

interface gigabitethernet
85
interface gigabitethernet
Sets items related to 10BASE-T/100BASE-TX/1000BASE-T, 100BASE-FX, and
1000BASE-X. Entering this command switches to
config-if mode, in which information
about the relevant port can be set.
Syntax
To set or change information:
interface gigabitethernet <IF#>
Input mode
(config)
Parameters
IF#
Sets the interface port number.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
See Specifiable values for parameters.
Default behavior
None
Impact on communication
None
When the change is applied
None
Notes
1. The port name is gigabitethernet + <Interface port number>.
Example: The name of the 0/25 port will be
gigabitethernet 0/25.
2. This command cannot be deleted.
Related commands
None