Specifications

flowcontrol
82
flowcontrol
Sets flow control.
Syntax
To set or change information:
flowcontrol send {desired | on | off}
flowcontrol receive {desired | on | off}
To delete information:
no flowcontrol send
no flowcontrol receive
Input mode
(config-if)
Parameters
send {desired | on | off}
Sets send operation for the pause packets of the flow control functionality. Specify
the same settings as those for the receive operation for the pause packets of the flow
control functionality at the destination.
desired
If fixed mode is set, pause packets are sent. If the auto-negotiation
functionality is set, whether pause packets are sent is determined through
communication with the connected Switch.
on
Pause packets are sent.
off
Pause packets are not sent.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
send desired, send on, send off
receive {desired | on | off}
Sets receive operation for the pause packets of the flow control functionality. Specify
the same settings as those for the send operation for the pause packets of the flow
control functionality at the destination.
desired
Pause packets are received. If the auto-negotiation functionality is set,
whether pause packets are received is determined through communication
with the connected Switch.
on
Pause packets are received.
off
Pause packets are not received.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.