Specifications

duplex
81
Default behavior
auto is set.
Impact on communication
If this command is set for the port in use, the port goes down and communication stops
temporarily. Thereafter, the port restarts.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. If auto or a parameter containing auto is set for speed or duplex, auto-negotiation is
performed.
2. For 1000BASE-X, if you do not want to use auto-negotiation, set
1000 for speed and
full for duplex. If auto or auto 1000 is set for speed, full is set for duplex as a
result of the auto-negotiation.
3. If
media-type is changed, the command settings return to the default state.
[AX1250S] [AX1240S]
4. If
media-type auto is set, this command cannot be set. [AX1250S] [AX1240S]
5. If the RJ45 port is used with fixed settings, MDI-X is selected.
6. For 100BASE-FX, set
full for duplex. [AX1250S]
Related commands
speed
media-type