Specifications

description
79
description
Sets supplementary information. This command can be used as a comment about the line.
Note that when this command is set, information can be checked by using the
show
interfaces or ifDescr (SNMP MIB) operation command.
Syntax
To set or change information:
description <String>
To delete information:
no description
Input mode
(config-if)
Parameters
<String>
Sets supplementary information for an Ethernet interface.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that is no more than 64 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
Default behavior
Null is set.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None