Instruction manual

5. Operations Required for Initial Installation
81
(a) Login
When the Switch is started, the
login prompt appears. Enter the user ID at the
prompt to log in to the Switch.
login: operator Type the user ID operator.
Copyright(c) 2006-2011 ALAXALA Networks Corporation. All rights reserved.
>
(b) Administrator password setting
Set the administrator password.
> enable
Enter administrator mode.
# password enable-mode
Enable the administrator password setting.
Changing local password for admin.
New password: ********** Set the administrator password.
Retype new password: ********** Re-type the password for confirmation.
#
Passwords can be between 6 and 16 characters. (If a password longer than 16
characters is entered, only the first 16 characters are registered.)
A password cannot contain only lowercase letters. We recommend using a
combination of uppercase letters, numbers, and special characters.
(c) Changing the user ID and setting a login password
[Step 1] Changing a user login ID
Change the user ID
operator to a different name, and then set a login
password.
# rename user
Enter the command for changing the user ID.
Changing username.
Old username: operator Type the current user ID.