Instruction manual

4. Installing Components and Adding, Replacing, or Removing Switches
72
4.7 Connecting a setup terminal
Connect a setup terminal to the CONSOLE port of the Switch.
For this connection, use an RS-232C crossover cable with D-sub 9-pin female
connectors on both ends.
Figure 4-13 Connection schematic of the setup terminal
(1) Setup terminal
(2) RS-232C cable
(3) CONSOLE port
[Step 1]
Connect an RS-232C cable to the CONSOLE port of the Switch.
Figure 4-14 Connecting the RS-232C cable
(1) RS-232C cable
(2) CONSOLE port
After the setup terminal is connected to the port, tighten the screws. Also make sure
the terminal is firmly connected.
[Step 2]
Connect an RS-232C cable to the setup terminal in the same way.