Instruction manual

4. Installing Components and Adding, Replacing, or Removing Switches
70
Figure 4-9 Removing the memory card
(1) Memory card
[Step 2]
Remove the memory card.
Figure 4-10 Removing the memory card
The device is accessing the memory card whenever the ACC LED is lit. While a
memory card is being accessed, do not remove the memory card or turn off the
power. Doing so might damage the memory card.
In addition, some commands require a certain amount of time after being entered to
finish accessing the card. Confirm that access has ended before removing the
memory card or turning the power supply unit off.
Do not forcibly pull the locked memory card to remove it. Doing so might damage the
connector of the memory card slot.