Instruction manual

4. Installing Components and Adding, Replacing, or Removing Switches
69
4.5 Inserting and removing memory cards
When moving the Switch, remove memory cards. If a card is subjected to excessive
force when the switch is moved, the connector of the memory card slot might be
damaged.
(1) Installing
Insert it into the device until you hear a click, and then release your finger slowly.
(Hold the memory card with the cut-off corner on the right.)
Figure 4-8 Inserting the memory card
(1) Memory card
(2) Memory card slot
When inserting a memory card, do not push the card too strongly or flick it with your
finger. Doing so might damage the connector of the memory card slot.
To avoid deleting and writing data, slide the protection switch to Lock.
Before installing a memory card, remove any dust in and around the memory card
slot with a dry cloth.
(2) Removing
[Step 1]
Push the memory card in until you hear a click. (The lock is released, and the
memory card is ejected slightly.)