Instruction manual

3. Preparation of Interface Cables and Terminals
60
3.2.3 Ethernet 100BASE-FX [AX1250S]
(1) Mode setting on the port
The available mode setting for Ethernet 100BASE-FX ports is fixed to full duplex.
Auto-negotiation and half-duplex (fixed) communication are not supported.
(2) Flow control functionality
This function is enabled when the connection is fixed to full duplex.
3.2.4 Ethernet 1000BASE-X
(1) Mode setting on the port
The available mode setting for Ethernet 1000BASE-X ports is fixed to full duplex.
Half-duplex (fixed) communication is not supported.
(2) Flow control functionality
This function is enabled when the connection is fixed to full duplex.