Instruction manual

2. Preparation for Installation
38
2.3.2 Electrical power equipment for 200 V AC
(1) AC power cable
An optional 200 V AC power cable is available that allows the Switch to be used in a 200 V
AC environment. For information about the 200 V AC power cable, see
1.4 Power cable.
If an optional ALAXALA power cable cannot be used with your power equipment,
use a power cable that meets the following ALAXALA specifications.
Use the power cable described below.
Table 2-7 Specifications for the 200 V AC power supply cable
Item
Connector
(on the Switch side)
Cable
Plug
(on the outlet side)
Rating 250 V 10 A or higher
PSE approved product
250 V 10 A or higher
PSE approved product
250 V 10 A or higher
PSE approved product
Type
Three cores Prepare a plug suitable
for the outlet.
When using a Switch in a 200 V AC environment, use only the separately sold
ALAXALA power cable, or a power cable that meets ALAXALA specifications.
Using another cable could result in fire or electric shock.
In addition, do not use the supplied power cable with another switch.
Doing so could result in a fire or electric shock.
(2) Standards for electrical outlets
If you use the ALAXALA optional power cable, use the outlet below. These electrical outlets
are available at general electrical contractors.
Table 2-8 Standards for electrical outlets
Standards Specifications
JIS C-8303 20 A 250 V grounding double-pole twist-locking
socket
NEMA L6-20R
Figure 2-3 20 A 250 V grounding double-pole twist-locking socket
If you do not want to use the ALAXALA optional power cable, use the outlet below.