Instruction manual

1. Components Overview
24
Laser beam, which is colorless and invisible, is used. Never look directly into the
optical transceiver.
Do not attach any labels to a transceiver.
A label attached to the transceiver indicates that the transceiver is a standard
product from ALAXALA or another manufacturer. However, such labels are attached
where they do not interfere with heat dissipation from the transceiver or the
mechanism that prevents the transceiver from coming loose from the cage.
Attaching a label on an interfering part with heat radiation or the mechanism to avoid
dropping from the cage might cause a failure in the transceiver or damage to the
device.
Make sure to use our standard products with the label shown in the figure.
Otherwise, correct operation is not guaranteed.
(1) SFP-FX
Figure 1-26 External appearance
(1) Label: AlaxalA SFP-FX
Label color: White
(2) Lever color: Black
The switches below support SFP-FX (T). Use the transceiver only with the indicated
switches. Not doing so could result in a Switch malfunction.
 AX1250S-24T2C (ports 25 to 26)
(2) SFP-SX
Figure 1-27 External appearance
(1) Label: AlaxalA SFP-SX