Instruction manual

1. Components Overview
23
1.3 Transceiver
1.3.1 SFP
To use the SFP, mount it to the SFP slot of the main device. Types of SFP
transceivers can be distinguished by either of the following:
Shape and lever color of the SFP transceiver (excluding SFP-FX and
SFP-SX)
Label information
Note that the supported SFP transceivers depend on the Switch model used. For
compatibility between the switch and SFPs, see
Table 1-9 SFP list.
To distinguish between the SFP-FX and SFP-SX, please check the label.
If the SFP is inserted into a switch, the SFP type can be identified by the interface
information displayed by the show port command.
For details about the show port operation command, see 13. Ethernet in the
Software Manual Operation Command Reference.
Table 1-9 SFP list
No. Module name Interface Supported models
1 SFP-FX Ethernet 100BASE-FX AX1250S series
2 SFP-SX Gigabit Ethernet 1000BASE-SX AX2200S series,
AX1250S series,
AX1240S series
3 SFP-SX2 Gigabit Ethernet 1000BASE-SX2
4 SFP-LX Gigabit Ethernet 1000BASE-LX
5 SFP-LH Gigabit Ethernet 1000BASE-LH
6 SFP-BX1U Gigabit Ethernet 1000BASE--BX10-U
#1
7 SFP-BX1D Gigabit Ethernet 1000BASE--BX10-D
#1
8 SFP-BX4U Gigabit Ethernet 1000BASE--BX40-U
#2
9 SFP-BX4D Gigabit Ethernet 1000BASE--BX40-D
#2
#1: 1000BASE-BX10-U and 1000BASE-BX10-D are paired to use.
#2: 1000BASE-BX40-U and 1000BASE-BX40-D are paired to use.