Instruction manual

1. Components Overview
22
1.2 Memory card
A memory card is inserted in the memory card slot of the main device.
The memory card is used for the following:
 Saving failure information when a failure occurs
 Updating the Switch software
(1) SD128
Below is an SD memory card with a 128-MB capacity.
Figure 1-24 External appearance
Label: AlaxalA SD128
(2) SD1G
Below is an SD memory card with a 1-GB capacity.
Figure 1-25 External appearance
Label: AlaxalA SD1G
Make sure to use our standard products with the label shown in the figure.
Otherwise, correct operation is not guaranteed.
The memory card can be written to approximately ten thousand times.