Instruction manual

1. Components Overview
19
No. Name Type Description Details
(9) 1-48 LED:
Green/Orange
LED
Indicates the operating
status of a
10/100BASE-TX
Ethernet port.
Lit in green: A link is established.
Blinking green: A link is established and
frames are being sent or received.
Orange: Initial state after the switch is
turned on.
Off: Link failure or block when the green
ST1 LED is on#4
(10) RESET Button
(non-locking)
Manual RESET button of
the device#1
Restarts the device.
When pressed continuously until all
LEDs on the front panel are lit (3
seconds or more), the Switch is released
from sleep mode.
#1: The switch is behind the front panel. Use a screwdriver with a small head to
press the button.
When pressing the RESET button, do not use anything with a fragile tip, or anything
that might become caught in the Switch, such as a pin or paper clip. Doing so could
result in a fire or electric shock.
1.1.7 Accessories
The items listed in Table 1-8 Switch accessories are included as accessories with
shipment of the switch.
Table 1-8 Switch accessories
No. Item Quantity Notes
1 Before using the Switch 1 Contains a checklist of the items included in the
packaging.
"switch" is replaced with the series name.
2 Safety Information 1
3 Software license agreement 1
4 Power cable 1 2-pin plugs, 3 m long
5 Rubber pad 4
6 Rack mounting bracket 2 Brackets for 19-inch mounting racks
7 Screws 12 M3 x 6 [AX2200S] [AX1250S]
M3 x 8 [AX1240S]