Instruction manual

I
Preface
About this Manual
This manual provides the hardware instructions for the ALAXALA AX2200S series Gigabit
Ethernet Layer 2 switches, and the ALAXALA AX1250S and AX1240S series Fast Ethernet
Layer 2 switches. Before you operate the equipment, read this manual carefully and make
sure that you understand all instructions and cautionary notes. After reading the manual,
keep it in a convenient place for easy reference.
Intended readers
This manual is intended for engineers who install and handle the AX2200S, AX1250S, and
AX1240S series of products. Readers are therefore required to have knowledge of electric
circuits, wire connections, and network systems.
Structure of manual
Safety Information
Notes for the safe use of the AX2200S, AX1250S, and AX1240S series switches are
described. Be sure to read and understand this section prior to using the Switch.
Chapter 1 Components Overview
An overview of the components of the Switch is provided.
Chapter 2 Preparation for Installation
Environmental conditions and required preparation for installation of the Switch are
described.
Chapter 3 Preparation of Interface Cables and Terminals
Describes the interface cables and the terminals used for the Switch.
Chapter 4 Installing Components and Adding, Replacing, or Removing Switches
Explains the procedures for installing components and for adding, replacing, and removing
Switches.
Chapter 5 Operations Required for Initial Installation
Describes the initial procedures for specifying the time, administrator password, user ID
changes, and login passwords.
Appendix A Cleaning Optical Connectors
Explains the procedures for cleaning the optical connectors of the transceivers and the
optical fiber cable connectors.
Appendix B Physical Specifications of Network Interfaces
Lists the specifications of the interfaces on the Switch.
Appendix C Specifications of setup terminal
Describes the setup terminal and its connection cables that are used with the Switch.