Instruction manual

1. Components Overview
4
Figure 1-2 Back view
(1) Cable clamp
(2) AC power connector
(3) Power switch
(2) Front panel
The front panel layout is shown in Figure 1-3 Front panel layout. The numbers in the
figure correspond to those in
Table 1-2 LED indications, buttons, and connectors.
Figure 1-3 Front panel layout
Table 1-2 LED indications, buttons, and connectors
No. Name Type Description Details
(1) PWR LED: Green Indicates the
power supply
status.
Lit in green: Powered-on.
Off: Powered-off or a failure with a power supply unit.
(2) ST1 Green,
Orange, Red
LED
Indicates the
device status.
Lit in green: Standing by or operating.
Blinking green: Getting ready (starting up).
Orange:Initial state at power-up
Blinking red: Partial failure with the switch
Lit in red: Fatal failure in the device (operation cannot
continue)
Off: Powered-off or a failure with a power supply unit.
(3) ST2 (Not used) (Not used) (Not used)
(4) MC Connector Memory card
slot
Memory card slot