Instruction manual

Safety Information
Safety - 7
Use the Switch's power button to turn off the Switch power.
Do not touch the Switch directly if you have a metal allergy.
 The Switch is coated with zinc, nickel, gold, and other elements. Do not touch the
Switch directly if you have an allergic reaction to these metals. Doing so might cause
eczema or skin irritation.
Avoid looking directly at laser beams.
 The Switch uses laser beams that are colorless and transparent, and invisible to the
eye. Never look directly into the optical transceiver.
Do not install the Switch in a dusty or humid location.
 Do not install the Switch in a dusty or humid location. Doing so could result in fire or
electric shock.
 Condensation might form on the surfaces and the inside of the Switch if it is moved
from a cold location to a warm location. Using the Switch in this condition could result
in fire or electric shock. After moving the Switch between two locations with a large
temperature variation, let the Switch stand a few hours before using it.
Do not step on the Switch, lean against it, or place anything on it.
 Do not step on the Switch, lean against it, or place anything on it. Doing so might
damage the Switch. Furthermore, the Switch might fall or lose its balance, resulting in
injury.
 Do not place any objects on the Switch. Doing so might damage the Switch.
Furthermore, the Switch might fall or lose its balance, resulting in injury.
Do not touch the inside of the Switch with your hands.
 Do not carelessly put your hands inside the Switch. The frame and components might
cause injury.
Cleaning
 Remove dust on and around the Switch regularly. In addition to possibly causing the
Switch to stop, accumulated dust might result in fire or electric shock.