Instruction manual

Appendix B Physical Specifications of Network Interfaces
93
B. Physical Specifications of Network Interfaces
B.1 Ethernet 10BASE-T/100BASE-TX
Table B-1 Physical specifications for 10BASE-T/100BASE-TX
Item
Physical specifications
10BASE-T 100BASE-TX
UTP cable
Non-PoE Category 3 and higher
Category 5 and higher
PoE Category 5 or higher
#1
Transmission distance (max.) 100 m 100 m
#1: Category 5 or higher UTP cable is recommended for the PoE connection.
B.2 Ethernet 10BASE-T/100BASE-TX/1000BASE-T
Table B-2 Physical specifications for 10BASE-T/100BASE-TX/1000BASE-T
Item
Physical specifications
10BASE-T 100BASE-TX 1000BASE-T
UTP cable
Non-PoE
Category 3 and higher
Category 5 and
higher
Enhanced category 5
and higher
PoE Enhanced category 5
and higher
#1
Transmission distance (max.) 100 m 100 m 100 m
#1 When connecting a 30.0 W or higher powered device, use an enhanced category
5 or higher cable.
Table B-3 10BASE-T/100BASE-TX/1000BASE-T pin assignment
RJ45
pin number
Physical specifications
10BASE-T
100BASE-TX 1000BASE-T
1 Receive (+) (A) Receive (+) (A) Send/Receive A (+) (A)
2 Receive (-) (a) Receive (-) (a) Send/Receive A (-) (a)
3 Send (+) (B) Send (+) (B) Send/Receive B (+) (B)
4 Not used
#1
(C) Not used
#1
(C) Send/Receive C (+) (C)