Instruction manual

5. Operations Required for Initial Installation
84
5.3 Other Operations
Operation management and configuration settings
For details about operation management and configuration settings, see the
corresponding manuals in
Table 5-2 Manuals for operation management and
configuration settings.
For details about operation commands, see the respective manuals in
Table 5-3
Manuals for detailed operation commands. For details about configuration
commands, see the respective manuals in
Table 5-4 Manuals for detailed
configuration commands.
Table 5-2 Manuals for operation management and configuration settings
Series name Reference manual
AX2200S series
AX1250S series
AX1240S series
AX2200S/AX1250S/AX1240S Software Manual Configuration Guide Vol.1
AX2200S/AX1250S/AX1240S Software Manual Configuration Guide Vol. 2
Table 5-3 Manuals for detailed operation commands
Series name Reference manual
AX2200S series
AX1250S series
AX1240S series
AX2200S/AX1250S/AX1240S Software Manual Operation Command Reference
Table 5-4 Manuals for detailed configuration commands
Series name Reference manual
AX2200S series
AX1250S series
AX1240S series
AX2200S/AX1250S/AX1240S Software Manual Configuration Command
Reference
After setting up a configuration, be sure to back up the operation information. This enables
the information to be restored easily in the event of a switch failure or switch replacement.
For details about back up operations, see 10. Device Management in the Software Manual
Configuration Guide Vol. 1.
(3) System interoperation tests
Before actual system operation, conduct a test to check the configuration settings.