Specifications

show ntp-client
70
show ntp-client
Displays the NTP client information.
Syntax
show ntp-client
Input mode
User mode and administrator mode
Parameters
None
Example
Figure 6-2 Displaying the NTP client information
> show ntp-client
Date 2009/02/23 11:38:05 UTC
Last NTP Status
NTP-Server : 192.168.7.1, Source-Address : ---
Mode : Multicast, Lapsed time : 14(s), Offset : 1(s)
Activate NTP Client
NTP-Server : ---, Source-Address : ---
Mode : Multicast
NTP Execute History(Max 10 entry)
NTP-Server Source-Address Mode Set-NTP-Time Status
192.168.7.1 --- Multicast 2009/02/23 11:37:51 1
192.168.7.1 --- Multicast 2009/02/23 11:36:51 1
192.168.7.1 --- Multicast 2009/02/23 11:35:51 1
192.168.7.2 --- Command 2009/02/23 11:35:24 Timeout
192.168.7.1 --- Multicast 2009/02/23 11:34:51 1
192.168.7.2 --- Command 2009/02/23 11:34:15 Timeout
192.168.7.1 --- Multicast 2009/02/23 11:33:51 1
192.168.7.1 --- Multicast 2009/02/23 11:32:51 1
192.168.7.1 --- Multicast 2009/02/23 11:31:51 1
192.168.7.1 --- Multicast 2009/02/23 11:30:51 0
>
Display items
Table 6-3 Information displayed by the show ntp-client command
Item Displayed information Displayed information
Last NTP Status The last information when it was possible to
obtain the time from the NTP server
--
NTP-Server The last accessed NTP server address --
Source-Address The specified source IP address This item is displayed in unicast mode, but
--- is always displayed because the source
IP address is not specified.