Specifications

clear radius-server
57
clear radius-server
Restores the primary RADIUS server as the RADIUS server to which the Switch submits a
request.
Syntax
clear radius-server [{common | dot1x | mac-authentication | web-authentication | group
<Group name>}] [-f]
Input mode
User mode and administrator mode
Parameters
{common | dot1x | mac-authentication | web-authentication | group <Group
name>
}
common
Only a general-use RADIUS server can be restored as the primary RADIUS
server.
dot1x
Only a RADIUS server used for IEEE 802.1X authentication only is restored
as the primary RADIUS server.
mac-authentication
Only a RADIUS server used for only MAC-based authentication is restored as
the primary RADIUS server.
web-authentication
Only a RADIUS server used for only Web authentication is restored as the
primary RADIUS server.
group <Group name>
Only a RADIUS server in the specified RADIUS group is restored as the
primary RADIUS server.
Operation when this parameter is omitted:
All the RADIUS servers restored as the primary RADIUS server by server
type.
-f
A return to the primary RADIUS server is done without displaying a confirmation
message.
Operation when this parameter is omitted:
A confirmation message is displayed.
Example
Figure 5-3 Example of the display when returning to the primary RADIUS server
 When a confirmation message is displayed:
> clear radius-server
Do you wish to clear priority of RADIUS server? (y/n): y
>
 When a confirmation message is not displayed: