Specifications

show lldp
639
Display items in Example 1
Table 36-1 Simplified display of LLDP setting information and neighboring device
information
Item Meaning Displayed information
Status Status of the LLDP functionality on
the Switch
Enabled: The LLDP functionality is enabled.
Disabled: The LLDP functionality is
disabled.
When the status is Disabled, LLDP is not
configured is displayed because there is
no information.
Chassis ID Chassis ID of the Switch --
Type Subtype for the chassis ID MAC: Indicates that a MAC address is
displayed for Info.
Info MAC address of the Switch --
Interval Time Interval for sending LDPDUs that
has been set on the Switch (in
seconds)
5 to 32768
Hold Count Multiplier for Interval Time, used
for calculating the LDPDU
retention time to be reported to
neighboring devices
2 to 10
TTL LDPDU retention time to be
reported to neighboring devices
10 to 65535
Port Counts Number of ports Number of ports that has been set for
enable-port
IF# Interface port number Number of the interface port whose
information is to be displayed
CH Channel group number This item is displayed if the applicable port
belongs to a channel group.
Link Port state Up: Indicates that the port status is Up.
Down: Indicates that the port status is Down.
Neighbor Counts Number of neighboring devices
whose information is retained
Number of neighboring devices whose
information is retained by the applicable port
Example 2
The following is an example of displaying LLDP information when the detail parameter is
specified.
Figure 36-2 Example of displaying detailed LLDP configuration information and
neighboring device information
> show lldp detail
Date 2011/09/15 13:33:18 UTC
Status: Enabled Chassis ID: Type=MAC Info=0012.e204.0001
Interval Time: 30 Hold Count: 4 TTL: 120
System Description: ALAXALA AX1240 AX-1240-24T2C [AX1240S-24T2C] Switching software