Specifications

show cfm statistics
630
show cfm statistics
Displays the CFM statistics.
Syntax
show cfm statistics [domain-level <Level>] [ma <No.>] [mep <MEPID>]
Input mode
User mode and administrator mode
Parameters
domain-level <Level>
Displays the CFM statistics for the specified domain level.
ma <No.>
Displays the CFM statistics for the specified MA ID number.
mep <MEPID>
Displays the CFM statistics for the specified MEP ID.
Operation when a parameter is omitted
This command can display only the information relevant to the condition applied by a
parameter that has been set. If the parameter has not been set, information is
displayed with no condition applied. If multiple parameters are specified, information
conforming to the conditions will be displayed.
Operation when all parameters are omitted:
All CFM statistics are displayed.
Example
The following figure is an example of displaying CFM statistics.
Figure 35-14 Example of displaying CFM statistics
> show cfm statistics domain-level 3
Date 2009/10/29 08:26:39 UTC
Domain Level 3 Name(str): ProviderDomain_3
MA 300 Name(str) : Tokyo_to_Osaka_300
MEP ID:300 0/1 (Up) CFM:Enable
CCM Tx: 23 Rx: 23 RxDiscard: 0
LBM Tx: 5 Rx: 5 RxDiscard: 0
LBR Tx: 5 Rx: 5 RxDiscard: 0
LTM Tx: 3 Rx: 1 RxDiscard: 0
LTR Tx: 1 Rx: 6 RxDiscard: 0
Other RxDiscard: 0
MIP Information
0/17(Up) CFM:Enable
CCM Tx: - Rx: - RxDiscard: -
LBM Tx: - Rx: 5 RxDiscard: 0
LBR Tx: 5 Rx: - RxDiscard: -
LTM Tx: - Rx: 4 RxDiscard: 0
LTR Tx: 4 Rx: - RxDiscard: -
Other RxDiscard: 0
>