Specifications

show cfm l2traceroute-db
622
show cfm l2traceroute-db
Displays route information acquired by the l2traceroute command and information about
the MP on the route. The information registered in the linktrace database is displayed.
Syntax
show cfm l2traceroute-db [{remote-mac <MAC address> | remote-mep <MEPID>} domain-level
<Level> ma <No.>] [detail]
Input mode
User mode and administrator mode
Parameters
{remote-mac <MAC address> | remote-mep <MEPID>}
remote-mac <MAC address>
Specify the MAC address of the destination remote MEP or MIP on the route
that will be displayed.
remote-mep <MEPID>
Specify the destination remote MEP ID on the route that will be displayed.
domain-level <Level>
Specify the domain level to which the destination remote MEP or MIP belongs.
ma <No.>
Specify the MA ID number to which the destination remote MEP or MIP belongs.
detail
Displays detailed information about the route and the MP on the route.
Operation when this parameter is omitted:
Only the route information is displayed.
Operation when all parameters are omitted:
All route information in the linktrace database is displayed.
Example 1
The following figure is an example of displaying route information in the linktrace database.
Figure 35-11 Example of displaying linktrace database information
> show cfm l2traceroute-db
Date 2009/10/29 08:28:28 UTCL2traceroute to MP:0012.e254.dc09 on Level:3 MA:300
MEP:300 VLAN:300
Time:2009/10/29 08:21:05
63 00ed.f205.0111 Forwarded
62 0012.e254.dc09 NotForwarded Hit
>