Specifications

clear cfm fault
620
clear cfm fault
Clears the CFM failure information.
Syntax
clear cfm fault [domain-level <Level> [ma <No.> [mep <MEPID>]]]
Input mode
User mode and administrator mode
Parameters
domain-level <Level>
Clears the failure information for the specified domain level.
ma <No.>
Clears the failure information for the specified MA ID number.
mep <MEPID>
Clears the failure information for the specified MEP ID.
Operation when a parameter is omitted
This command can clear only the information relevant to the condition applied by a
parameter that has been set. If no parameter is specified, information is cleared
without being limited by any conditions. If multiple parameters are specified, the
information conforming to the conditions will be cleared.
Operation when all parameters are omitted:
All failure information is cleared.
Example
The following figure is an example of clearing CFM failure information.
Figure 35-10 Example of clearing CFM failure information
> clear cfm fault
>
Display items
None
Impact on communication
None
Response messages
Table 35-15 List of response messages for the clear cfm fault command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
CFM is not configured. CFM has not been configured. Check the configuration.