Specifications

mkdir
44
Message Description
Can't access to MC by write protection. Make sure the memory card's protect switch is not set
to Lock. If the switch is set to Lock, move it to the
opposite side, and then insert the memory card again.
Make sure there is no dust in the memory card slot. If
there is dust, remove it with a dry cloth and then insert
the memory card again.
MC is not inserted. A memory card was not inserted.
Notes
 The mc-dir parameter cannot be used when a memory card is not inserted.
 When the
mc-dir parameter is specified, the ACC LED is on while the command is
being executed. Do not remove or insert the memory card while the ACC LED is on.
 You can specify a maximum of 64 characters for a directory name, but if you do so,
you might not be able to use a long name in the
show and copy commands.