Specifications

show cfm fault
616
show cfm fault
Displays the type of failure that has been detected by the CC functionality of CFM, and the
information in the CCM that triggered the failure.
Syntax
show cfm fault [domain-level <Level>] [ma <No.>] [mep <MEPID>] [{fault | cleared}]
[detail]
Input mode
User mode and administrator mode
Parameters
domain-level <Level>
Displays the failure information for the specified domain level.
ma <No.>
Displays the failure information for the specified MA ID number.
mep <MEPID>
Displays the failure information for the specified MEP ID.
{fault | cleared}
fault
Displays only the failure information being detected.
cleared
Displays only the failure information that has been cleared.
Operation when a parameter is omitted
This command can display only the information relevant to the condition applied by a
parameter that has been set. If the parameter has not been set, information is
displayed with no condition applied. If multiple parameters are specified, information
conforming to the conditions will be displayed.
detail
Displays detailed information about a failure.
Operation when this parameter is omitted:
Summary information about a failure is displayed.
Operation when all parameters are omitted:
Summary information about all failures is displayed.
Example 1
Display summary information about a CFM failure.
Figure 35-8 Example of displaying failure information
> show cfm fault
Date 2009/10/29 07:28:29 UTC
MD:6 MA:100 MEP:600 Cleared Time:-
MD:7 MA:1000 MEP:1000 Fault Time:2009/10/29 07:27:20
MD:7 MA:1010 MEP:1011 Cleared Time:-
>