Specifications

clear cfm remote-mep
614
clear cfm remote-mep
Clears the remote MEP information.
Syntax
clear cfm remote-mep [domain-level <Level> [ma <No.> [mep <MEPID>][remote-mep <MEPID>]]]
Input mode
User mode and administrator mode
Parameters
domain-level <Level>
Clears the remote MEP information for the specified domain level.
ma <No.>
Clears the remote MEP information for the specified MA ID number.
mep <MEPID>
Clears the remote MEP information for the specified MEP.
remote-mep <MEPID>
Clears the information for the specified remote MEP ID.
Operation when a parameter is omitted
This command can clear only the information relevant to the condition applied by a
parameter that has been set. If no parameter is specified, information is cleared
without being limited by any conditions. If multiple parameters are specified, the
information conforming to the conditions will be cleared.
Operation when all parameters are omitted:
All remote MEP information is cleared.
Example
The following figure is an example of clearing remote MEP information.
Figure 35-7 Example of clearing remote MEP information
> clear cfm remote-mep
>
Display items
None
Impact on communication
None
Response messages
Table 35-11 List of response messages for the clear cfm remote-mep command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.