Specifications

show cfm remote-mep
612
Item Meaning Displayed information
Chassis ID Chassis ID of the remote
MEP
Displays the chassis ID information in the CCM that was
last received.
Type Subtype of the chassis ID Type of the information displayed for Info.
 CHAS-COMP: Indicates that entPhysicalAlias of the
Entity MIB is displayed for Info.
 CHAS-IF: Indicates that ifAlias of the interface
MIB is displayed for Info.
 PORT: Indicates that portEntPhysicalAlias of the
Entity MIB is displayed for Info.
 MAC: Indicates that macAddress of the CFM MIB is
displayed for Info.
 NET: Indicates that networkAddress of the CFM
MIB is displayed for Info.
 NAME: Indicates that ifName of the interface MIB is
displayed for Info.
 LOCAL: Indicates that local of the CFM MIB is
displayed for Info.
-- is displayed if this information is not in the received
CCM.
For this information sent from the Switch, MAC is
displayed for Type and the MAC address of the Switch
is displayed for Info.
Info Information about the
chassis ID
Information displayed for Type.
-- is displayed if this information is not in the received
CCM.
Impact on communication
None
Response messages
Table 35-10 List of response messages for the show cfm remote-mep command
Message Description
Can't execute. The command could not be executed. Re-execute the
command.
CFM is not configured. CFM has not been configured. Check the configuration.
No such Remote MEP. The specified remote MEP is unknown. Make sure the
specified parameter is correct, and then try again.
Specified Domain Level is not configured. The specified domain level has not been configured.
Make sure the specified parameter is correct, and then
try again.
Specified MA is not configured. The specified MA ID has not been configured. Make sure
the specified parameter is correct, and then try again.
Specified MEP is not configured. The specified MEP ID has not been configured. Make
sure the specified parameter is correct, and then try
again.