Specifications

show cfm remote-mep
611
Item Meaning Displayed information
ID Remote MEP ID --
Status The status of failure
detection in the remote
MEP
The highest-level failure of the failures detected by the
remote MEP is displayed.
 OtherCCM: Indicates that a CCM was received
from another MA.
 ErrorCCM: Indicates that a CCM that contains an
invalid MEP ID, or a CCM with an invalid
transmission interval, was received.
 Timeout: Indicates CCM timeout.
 PortState: Indicates that a CCM reporting a port
failure was received.
 RDI: Indicates a CCM reporting failure detection
was received.
-- is displayed if any failure has not been detected.
MAC MAC address of the
remote MEP
--
Time The time when a CCM
was last received
yyyy/mm/dd hh:mm:ss year/month/day
hour:minute:second
Interface The status of the remote
MEP interface
The status of InterfaceStatus in the CCM that was last
received.
 Up: Indicates Up status.
 Down: Indicates Down status.
 Testing: Indicates that the test is being
performed.
 Unknown: The status is unknown.
 Dormant: Waiting for an external event
 NotPresent: There is no component for the
interface.
 LowerLayerDown: Indicates that the status of the
lower-layer interface is Down.
-- is displayed for the following cases:
 This information is not in the received CCM.
 The failure information has been cleared by the
clear cfm fault command.
Port The status of the remote
MEP port
The status of PortStatus in the CCM that was last
received.
 Forwarding: Indicates Forwarding status.
 Blocked: Indicates blocking status.
-- is displayed for the following cases:
 This information is not in the received CCM.
 The failure information has been cleared by the
clear cfm fault command.
RDI The status of failure
detection in the remote
MEP
Indicates that a failure has been detected by the remote
ME P. This is the status of the RDI field in the CCM that
was last received.
 On: A failure is being detected.
-- is displayed for the following cases:
 No failure has been detected.
 The failure information has been cleared by the
clear cfm fault command.