Specifications

show cfm remote-mep
610
Display items in Example 2
Table 35-9 Items displayed for detailed remote MEP information
Item Meaning Displayed information
Total RMEP Counts Total number of remote
MEPs
--
Domain Level <Level>
Domain level and domain
name
<Level>: Domain level
Name:-: Indicates that the domain name is not used.
Name(str):<Name>: A character string is used for the
domain name.
Name(dns):<Name>: A domain name server name is
used for the domain name.
Name(mac):<MAC>(ID): A MAC address and ID are
used for the domain name.
MA <No.>
MA ID number and MA
name
<No.>:Configured MA ID number
Name(str):<Name>: A character string is used for the
MA name.
Name(id):ID: A numeric value is used for the MA
name.
Name(vlan):<VLAN ID>: A VLAN ID is used for the
MA name.
MEP ID MEP ID for the Switch --
IF# Port number MEP port number
CH<Channel group#>
Channel group number MEP channel group number
Up The port is in Up status. Indicates that the port is in Up status.
If link aggregation is used, this means that the channel
group is in Up status.
Down The port is in Down
status.
Indicates that the port is in Down status.
If link aggregation is used, this means that the channel
group is in Down status.
Enabled CFM on a port is enabled. --
Status The status of failure
detection on the Switch's
MEP
The highest-level failure of the failures detected by the
Switch's MEP is displayed.
 OtherCCM: Indicates that a CCM was received
from another MA.
 ErrorCCM: Indicates that a CCM that contains an
invalid MEP ID, or a CCM with an invalid
transmission interval, was received.
 Timeout: Indicates CCM timeout.
 PortState: Indicates that a CCM reporting a port
failure was received.
 RDI: Indicates a CCM reporting failure detection
was received.
-- is displayed if any failure has not been detected.
RMEP Information Remote MEP information --
Counts Number of remote MEPs --